1： Introduction to PVDF Fluorocarbon Color Steel Plate

PVDF fluorocarbon color coated plate is produced using a color coating production line, which undergoes multiple processing techniques to give the surface of the aluminum plate beautiful colors, patterns, patterns, etc. Fluorocarbon coated plate can replace Baosteel coated plate, with low price, wide application, and long service life.

The production of nano insulated fluorocarbon colored aluminum plates should be closely integrated with market demand: the main use of insulated colored aluminum plates is for building curtain walls and interior and exterior wall decoration. Therefore, the development of insulated colored aluminum plates should be guided by the needs of the construction and decoration industries, closely integrated with the construction and decoration industry, and take the path of common development and prosperity.

1. Testing method for detergent resistance of fluorocarbon color coated board

Soak the test pieces (at least 2 pieces) in a solution containing 3% (by mass) detergent at 38 ℃± 3 ℃ for 72 hours. The detergent composition is shown in Table 2. Remove and rinse with tap water and wipe dry. Immediately apply a high viscosity adhesive tape (with a width of 20 mm) as specified in 5.6.1, press it tightly, and remove any air bubbles from the cavity inside the tape. Stick the tape along the length of the sample to the top, and tear it off quickly from the sample.

2. Price of fluorocarbon color coated board:

In addition, the price of fluorocarbon color coated panels is also affected by coatings, such as polyester coating, PVDF coating, PE coating, and powder coating, which will affect the quotation of fluorocarbon color coated panels.

2： PVDF Fluorocarbon Color Steel Plate Coating Process

Adopting the two coating and two drying roller coating curing process.

matters needing attention:

3. Transportation requirements

Transport vehicles should be cleaned and equipped with protective rubber pads, grass ropes, or specialized saddles. There should be no direct contact between the two rolls, and rubber or grass ropes should be added and fixed with ropes to prevent scratches and wear caused by sliding back and forth. Professional tools should be used for transportation and lifting to prevent shaking, indentation, pollution, collision, and relative movement. The requirements for home appliance board surface are strict, and vertical packaging must be used for remote transportation to prevent pressure points on the board surface.

2. Storage requirements

The storage environment for steel coils and formed products should ensure ventilation and moisture resistance. They should not be stored outdoors or in areas prone to frost and large temperature differences. The storage area should be flat and free of foreign objects, avoiding stacking and stacking three layers (including three layers). Metal paint series, cold film series, and embossed boards can only be stored in a single layer, which can easily cause rolling.

1. Usage requirements

Due to the aging effect of steel, its physical properties will change with the extension of storage time. Prolonged storage will absorb moisture and water, resulting in corresponding changes in performance and coating, leading to poor workability. To avoid poor workability caused by aging reactions of the product, it is recommended that users use it as soon as possible. Fluorocarbon polyester coating is softer than polyester and other coatings. It is recommended to cover it with a protective film before processing. During processing, installation, and use, attention should be paid to protection. The quality requirements for home appliance board surfaces are strict, and it must be covered with a protective film before cutting, storage, or processing. During processing, installation, and use, attention should be paid to protecting the color plate.

a. Pre treatment process of fluorocarbon color coated plate:

The hardness of ordinary color coated aluminum plates tested with a pencil is only Hb, which can only meet ordinary decorative purposes. For projects with complex processing techniques or easy contact with hard objects in the future, it is easy to scratch or scratch the surface. The anti scratch color coated aluminum plate is cured using particle anti scratch coating technology, and its strength is more than 5 times that of ordinary color coated aluminum plate, which can resist scratches from sharp objects.

b. Multi layer roller coating process for fluorocarbon color coated plate:

The hardness of ordinary color coated aluminum plates tested with a pencil is only Hb, which can only meet ordinary decorative purposes. For projects with complex processing techniques or easy contact with hard objects in the future, it is easy to scratch or scratch the surface. The anti scratch color coated aluminum plate is cured using particle anti scratch coating technology, and its strength is more than 5 times that of ordinary color coated aluminum plate, which can resist scratches from sharp objects.

3： Characteristics of PVDF Fluorocarbon Color Plate

1. It has extraordinary stability and can maintain stable performance in acidic, alkaline, and heavily polluted environments.

2. With a durability of over 15 years, fluorocarbon coated panels can maintain good color and gloss even outdoors for 15 years.

3. Excellent processing performance, the painted color plate has high flexibility, impact resistance, and can also undergo post embossing treatment.

4： Comparison of PVDF Fluorocarbon Color Steel Plate Color Cards

5： PVDF Fluorocarbon Color Steel Plate Parameters

6： Application of PVDF Fluorocarbon Color Steel Plate

Due to its excellent corrosion resistance, UV resistance, and good processing performance, PVDF fluorocarbon color coated plates are widely used in public buildings such as airports, high-speed railways, sports venues, as well as in building applications such as electrical, steel, chemical, and smelting industries that require high corrosion and aging resistance.

7： Product Display